E2M80
Specification:E2M80
Displacement | |
50Hz | 80 m3h-1 / 47.1 ft3min-1 |
60Hz | 96 m3h-1 / 56.5 ft3min-1 |
Speed (Pneurop) | |
50Hz | 74 m3h-1 / 43.6 ft3min-1 |
60Hz | 90 m3h-1 / 53 ft3min-1 |
Number of stages | 2 |
Ultimate vacuum | |
Without gas ballast (total pressure) | 1 x 10-3 mbar / 7.7 x 10-4 Torr |
With gas ballast (partial pressure) | 5 x 10-3 mbar / 3.8 x 10-3 Torr |
Ultimate with Fomblin® | |
Without gas ballast | 1 x 10-2 mbar / 7.7 x 10-3 Torr |
Inlet connection | ISO40 |
Outlet connection | 25 mm flange suitable for NW25 |
Max outlet pressure | 0.5 bar gauge |
Max inlet pressure for water vapour | 5 mbar / 3.8 Torr |
Max water vapour pumping rate | 0.3 kg h-1 / 0.7 lb h-1 |
Weight | 102 kg / 224 lb |
Motor protection rating | IP55 |
Motor power | |
50Hz | 2.2 kW / 3 hp |
60Hz | 3 kW / 4 hp |
Standard oil capacity | |
maximum | 6.3 litre |
minimum | 4 litre |
PFPE oil capacity | |
maximum | 4 litre |
minimum | 2.2 litre |
Recommended oil | Ultragrade 70 |
PFPE prepared version | Fomblin® Y06/6 |
Noise level | 70 dB (A) |
Hydrocarbon Prepared - HC
Standard pump for use with Ultragrade oil. Oil supplied with the pump
PFPE Prepared - FX
These pumps are assembled and tested using PFPE fluid. PFPE (Fomblin®) to be purchased separately
Azide Compatible - AZ
Similar to hydrocarbon pumps but with copper and brass parts replaced with other suitable materials such as stainless steel. Supplied with Ultragrade oil.